vsti dxi rtas au refills sf2 all about synthetizers, virtual synths, keyboard production music dj equipment, sound engineering, audio recording, sound recording, music recording, system requeriments, PC MAC prices, School training in audio engineering, sound engineering, audio recording, sound recording, music recording, recording arts, audio production and music production. audio engineering school,sound engineering school,audio school... dj software, dj tools, legal downloads

lunes, 7 de abril de 2008

How to Build aA full blown software sampler for free??!!


How to Build a
Bank of SoundFonts

Build you Own Custom Virtual Synth

by Rich the TweakMeister

Building a good SoundFont is the same process as building a sample based synthesizer from scratch. You can use any sample and tweak it with a wide range of envelopes, filter and resonance settings and effects just like you can on a standard analog style synth. If you always wanted to build your own synth from scratch, the SoundFont protocol allows you do do this entirely in the virtual domain. And it's cheap! No hardware is needed other than the SF2 compatible sound card and any decent midi keyboard to trigger the sounds. The results are as good as the care you put into the process. If you really work the format, and are savvy with plugin FX, digital audio sequencers and wave editors, your results will be on par--and may even exceed--those developing sounds on professional samplers. You do have to know what you are doing, or have a relentless drive to experiment. Then there is a matter of taste. It isn't going to happen on a weekend. But if you are like me, an incurable tweakhead, searching for beauty and art through sound, there are few things as satisfying as a well made soundfont collection. Join the discussion on making SoundFonts

What you need to get started:

  • A soundcard that plays soundfonts. The best choices here are the sblive soundcards (any) and the Emu APS
  • Vienna 2.3 (Free on the Creative Labs site)
  • A decent Sample Editor (I use Sound Forge 4.5, but anything that has looping tools will be fine)
  • A MIDI keyboard with velocity and aftertouch. (Aftertouch is important).

Step One:

Make your .WAV files.

Check out the TweakMeister's Own Virtual Synth The Ice Kold Tekno Orkestra!

The Ice Kold Tekno Orkestra SoundFont Collection

--Features --

  • 21 Banks of SoundFonts of the Vintage Korg Ms20 Analog Synthesizer (163 megs!)

  • Over 585 Tekno/Industrial Samples

  • Unique "Analog" General MIDI Bank included

  • Its also an Audio CD and Wav file collection

  • More than 730 Unique Presets

  • This is a Complete Analog Tek Orchestra

  • Support Files for Logic Audio, Cubase VST and Cakewalk Pro

Available ONLY on this website
Order Info

You Get what you pay for!


The quality of your .WAV files are the building blocks of your SoundFont. Record them as cleanly as possible. Record as hot as you possibly can without distortion, and delete anything that has burst through the roof. These should be in standard .WAV format. Be careful to name them with names you will remember. Its also helpful during the programming process if you put a code in the name to help you find it in the sample list when making instruments. Codes are just simple abbreviations, and you can use whatever you want, but they should be short. For example, your drums sounds could be named


When you open the list you will see the samples in alphabetical order. You will save minutes with each instrument you make scrolling through the sample list. If you are planning a SoundFont of 256 instruments and 256 presets, this will translate into many hours saved.

Make sure all your wave files have their gain optimized. I recommend using a compression plugin or utility to give all samples a uniform character. They should not have any 'overs' or clipping, as you will hear these artifacts in any instrument you use it in, but you should get as close as you can to maximize gain. Some may disagree with this as the cumulative effect of combining hot samples can easily overload the output of the onboard synth. However, I feel you can adjust the level of the sample later as you build instruments and presets, and as long as you do this you can avoid clipping the output and get the best signal to noise ratio.

Tuning is probably the biggest problem with SoundFonts. Get it right at the sample level. Otherwise you will be retuning all your instruments that use the ill-tuned sample. While the SF2 format allows for micro adjustments to tuning you will get pissed when you find you always have to retune a certain sample 15-30 times at the instrument level because you neglected to do it at the beginning. Always keep a synth fired up as reference for tuning. A typical piano patch works well.

Loop nearly all your samples. Even select drums. You can use these as great effects later on in the building of great presets. The SF2 format allows you to turn off loops at other levels of the programs. You can often save time by having a looping session and do them all at once. See my looping tips.

Finally IMPORT all your samples within Vienna. You can import more than one sample at a time. If you put all your samples in one directory (recommended) when the import window opens to browse your hard drive you can rubberband about twenty samples and import them all at once. Over 20 doesn't seem to work.

Step 2:

Make Instruments

Go to the menu and select "new instrument". Give it a unique name. The "New Zone: box will open and you can select any sample you want. You can select more than one sample as long as they are next to each other in the list. See? Aren't you glad you followed my advice in Step One? All you synths are together, all your drums are together, making selection very easy.

Now you have to edit the characteristics of each zone. That is, set the Range and Root Key. That's really pretty easy if you use the right click context menus and the mouse to do these. Its as easy as any sampler I've worked with and you can see the results on the big screen.

Tip: Make sure you have enough samples to cover the entire keyboard. Perhaps the only troublesome part of the sf2 format is that samples do not stretch as far as they do on a professional sampler. For example, if your sample has a root note of C3, and you try to stretch it to cover the keyboard, you will find that the sample will detune at and play the same out of tune pitch at about A6 and higher. The trick, of course, is to have a C5 version of the same sample, which will make it to the end of an 88 key keyboard. However, and here's a point most inexperienced Fontists miss, if you end up transposing and instrument down in the preset level, you may still run out of sample on the high end even though it plays perfect at the instrument level. Rule of thumb, always give yourself an extra octave of playable notes than you need. Some might say an octave and a fifth. Of course for high quality instrument emulations, you may need a sample every 4-12 notes, depending on the instrument you are emulating.

Once you have your samples mapped and tuned properly, its time to use the onboard synth to program them. Vienna appears to give you a choice of programming them at the preset level as well, but in actual practice, many of the synth parameters do not function at that level. They do function at the instrument level, and its here that you should program your sound.

First create and program a Global Zone for the instrument. Right click the instrument and choose global zone. These are default values for all the sample zones for filter, resonance, envelopes, LFOs, etc. You can change them for each individual zone if you want later. Many times however, defining just the global zone may be enough, and you can always delete it later if you end up tweaking all the parameters of each individual zone.

At this point you should really begin to appreciate the tremendous flexibility of the SF2 format. You can stack up zones within and instrument as deep as you want. However, I recommend, unless you really know what you want, to save that for the preset building stage where you can stack instruments up. It is best to put 1-3 layers of zones in an instrument. The fewer layers of zones, the more potential use you will get out of the instrument at the preset stage. Also, do not set the FX at the instrument level. This is better done at the preset level too. Of course, there are exceptions. If you want Zone 1 and 2 to have a chorus and zone 3 to have chorus and reverb, then yes, you could define it here. But overall, its better to consider the instruments as your raw building blocks for the presets.

Step 3:

Making Presets

You build presets using the same methods as building instruments. Except this time you are shooting for the finished, polished sound. If you have 200 instruments in your SoundFont made, you probably have enough to make well over 600 unique sounding presets. . First set the global zone. Here you can set your FX send levels for the preset. Then you can click each instrument with the preset and set the 'Initial Attenuation" parameter. This basically allows you to mix the volumes of the different sounds in a tasteful way. Parameters that I advise tweaking. You can also set Coarse Tuning and Fine tuning to taste. I advise not programming filter cutoff or resonance at this level as the results are not always predictable--this is better done when programming the instrument. Though sometimes you can get the effect you want playing with them. You will find that the parameters work by multiplying the value that is defined in the instrument. Oddly Vienna may give you 127 steps for this and it may create errors. For example, if the filter is set to 1.0 (khz) and you multiply that by 127, you will have an unusable result. Enter sample values with the keyboard like 1.1, .9, .85, 1.15 and you will get useful results for most of the parameters.

Organize your presets in a way that makes sense. Generally, the way most synth manufacturers organize their presets is as follows:

  • Pianos and Keys
  • Chimes and Bells
  • Organs
  • Guitars
  • Basses
  • Strings
  • Brass
  • Winds
  • Pads
  • Leads
  • FX
  • Drums

Of course its your bank, do what you want. Personally, I like putting all my drums first, then Basses, then keys. Be creative.

To reorder presets you can use the SoundFont Bank Utility by Emu. This used to be available at their website. Haven't seen it lately though. Its tricky to work with and the docs are sparse, but I can't go into that here.

I don't have time to get into the tricks to making a good drum kit here (perhaps that will come), but I will say that the kits one makes in a SoundFont can be as interesting and as good sounding as those one can make in a professional sampler. There is no limit to the number of zones you can have in the drum preset, so you can assign 1,2 3 or more zones per key--each with their own filter setting if you want. OK one more tip: You can layer your kits which are defined at the instrument level when you make a preset. That is you can have two contrasting kits playing on top of one another. Pan them L/R. Or Use the same kit and detune by a fifth. Or a second. Its absolutely mindblowing, even for a TweakMeister!

The Secrets

The building of a quality SoundFont takes a long time, just as building a synth from scratch takes a long time. The process is the same. The building of the Ice Kold Tekno Orkestra took many many months working with little sleep. However, the end product is so rewarding you will find yourself using your font in many of your productions. Its truly a creative art. You will also find after jumping through these hoops making your own that you can do better than most of the soundfonts out there. You might even find it hard to go back to your hardware sampler after discovering the joys of manipulating sounds on the big screen. I know some pros that scoff at the SoundFont process, but don't let that sink in. The sound quality of well made SF2 files is just as good as any 16 bit sampler, The soundcard itself may add a very thin veil of distortion, but it is so small it will not be evident on boards that most home studio folks can afford. If you use a digital out on your soundcard, the playing field with professional 16 bit samplers is almost level. 5 years ago you would have to pay 10's of thousands to get the flexibility you have with a cheap soundcard. That's the secret the pros won't tell you. With a little creativeness, you can make the same incredible sounds they do. Experimentation has never been easier. The layering, mixing, timestretching, panning, morphing, vectoring capabilities are easily had by anyone who works with the SF2 format. Add some cool plugins and resample in a digital audio sequencer and you are actually far beyond what a stand alone hardware sampler can do! A final tip: its not going to be long before excellent conversion tools will be in place to import soundfonts into samplers. The Tweak is about to beta test one. This will clearly raise the bar in commercially available soundfonts. It could easily become the de facto standard that links all samplers together in a consistent format. As time goes on, we will see the hardware sampler as an extension of the SoundFont protocol, much the way laptop computers dock to their desktop hosts. Within a year or two, this will be reality. Why? you ask? Its just easier to work this way!

Best of Luck in your Fontmanship!

Rich the Tweakmeister

You can check out and order the Tweakmeister's own custom synth, the Ice Kold Tekno Orkestra, available for purchase on this website.

Home | About | Link | Link
Simple Proff Blogger Template Created By Herro | Inspiring By Busy Bee Woo Themes