vsti dxi rtas au refills sf2 all about synthetizers, virtual synths, keyboard production music dj equipment, sound engineering, audio recording, sound recording, music recording, system requeriments, PC MAC prices, School training in audio engineering, sound engineering, audio recording, sound recording, music recording, recording arts, audio production and music production. audio engineering school,sound engineering school,audio school... dj software, dj tools, legal downloads

miércoles, 18 de junio de 2008

Edison 3. Menu Buttons tutorials

·

Edison

Edison is a fully integrated audio editing and recording tool. Edison loads into an effect slot (in any mixer track) and will then record or play audio from that position. You may load as many instances of Edison as you require in any number of Mixer Tracks or Effects slots. To open Edison press Ctrl+E in a Sampler Channel, or load from the effects menu into mixer track/s.

1. Transport Controls

2. Recording Options

3. Menu Buttons

File

  • Open/Save options
    • New - Opens a new (empty) editor window.
    • Load sample (Ctrl+O) - Opens a file browser dialog in 'load' mode.
    • Save sample as (Ctrl+S) - Opens a file browser dialog in 'save' mode.
    • Export regions as - Exports any regions as wave files. The names of the markers at the start of each region will be used as the file names.
    • Export display as - Exports the wave display as a .png or .jpg image.
  • Settings - Opens a transport & midi settings dialog
    • Piano keyboard preview - While Edison is focused notes will be trapped and not passed onto the currently selected channel.
      • Link key to - Note preview (plays the whole sample), Slice preview (play slices), Auto (slices or whole sample depending on note range played and if slices are present).
    • Slave playback to host - Determine how Edison responds to host Playlist selections.
      • Ignore host selection - Edison will play back the equivalent region (based on time) as selected in the host. For example, if you record your whole song into Edison, you could then select a part of the song in FL and edison would play the same part that's selected in FL.
      • Ignore own selection - The region selected in Edison controls the region (based on time) of the Playlist played.
  • Recent projects - Lists the 10 most recently opened projects.

Format

  • Edit properties (F2) - Opens the 'Sample properties' dialog where you can set the file properties.
  • Resolution
    • 16Bit int - Sets the file to 16 bit integer format. This is CD audio standard.
    • 32Bit float - Sets the file to 32 bit floating point format. This is the native format for FL Studio audio processing.
  • Channels
    • Mono - Sets the file to Mono.
    • Stereo - Sets the file to Stereo. Mono files will be saved with L and R channels containing the same data.

Edit

Many of the actions in this menu work on a selected region. To select a region, left-click in the sample window and drag horizontally. To move the start point, left-click near the start of the region and drag to a new point. To move the end point, left-click near the end of the region and drag to a new point. At any time you can zoom the window using the mouse wheel.

  • Undo (item) (Ctrl+Z) - The first item in this menu indicates the last action performed.
  • Undo history - Displays the last 10 actions.
  • Undo using mix (envelope) - Uses the All-Purpose envelope to guide the undo process. A number of options will be shown based on the actions recently made.
  • Undo using mix (spectral) - Uses the All-Purpose envelope to apply the EQ curve set in the EQ tool. Apply an EQ, tweak the all-purpose envelope, use the 'Undo mix envelope' option.
  • Disable undo for large samples - Turns off the undo feature. This is useful for saving memory and CPU when working on very large samples.
  • Cut (Ctrl+X) - Cuts the selected region.
  • Copy (Ctrl+C) - Copies the selected region.
  • Paste insert (Ctrl+V) - Inserts the copied sample at the start of the selected region.
  • Paste replace (Alt+V) - Replaces the selected region with the copied sample. The duration of the copied sample determines how much of the region will be replaced.
  • Paste mix (Shift+V) - Mixes the copied sample with the selected region. The duration of the copied sample determines how much of the region will be mixed.
  • Paste mix (envelope) (Shift+Ctrl+V) - Mixes the copied sample with the selected region. The duration of the copied sample determines how much of the region will be mixed.
  • Paste mix (spectral) - (Ctrl+Alt+V) - Uses the All-Purpose envelope to apply the EQ curve set in the EQ tool. Apply an EQ, tweak the all-purpose envelope, use the 'Paste mix (spectral) option.
  • Paste stretch (Shift+Ctrl+T) - Pastes the copied sample via the Time Stretch / Pitch Shift Tool.
  • Paste replace (drum) (Shift+T) - Opens the Paste replace drum tool. This tool reconstructs the decay portions of drum beats that may have been cropped during the slicing process and replaces the selection to the original location.
  • Clear - (Shift+Del) Clears the selected region, leaving the rest of the sample unchanged. Consider this a mute function.
  • Delete (Del) - Deletes the selected region. This function will change the overall length of the sample.
  • Trim (Ctrl+Del) - Deletes the region outside the selection.
  • Delete part after loop ( Alt+Del) - Deletes sample data after the loop end point.
  • Insert silence (Ins) - Inserts silence from the region start point of a length equal to the selected region.
  • Click-free (smooth) editing (C) - Switch, prevents audio clicks/pops in samples caused by edit functions. This option avoids the clicks caused by discontinuities in the sample amplitude at cut/splice points by fading, or crossfading, edit points by a few samples.

Tools

  • Envelope
    • Cancel all envelopes (Alt+E) - Cancels all envelopes.
    • Add points at selection (P) - Automatically adds points at the start, middle and end of a selected region for the currently selected envelope type (10).
    • Add points at regions - Adds control points at the boundary of the selected region and/or where region markers are located.
    • Flip vertically - Inverts the envelope points.
  • Amp
    • Mixdown amp envelopes (Ctrl+E) - Applies custom envelope/s to the sound.
    • Amp (Alt+A) - Opens the Amplitude Tool that allows you to modify L/R channel volume, Panning and Stereo Separation.
    • Reverse polarity - Inverts the phase of the waveform.
    • Normalize (Ctrl+N) - Increases the volume of the waveform so that the loudest sample is at 100% of the available amplitude.
    • Fade in (Ctrl+F) - Ramps up the volume from 0% to 100% using a logarithmic curve. If a region is selected the fade function will apply to that, if not, the entire sample will fade in.
    • Fade out (Alt+F) - Ramps down the volume from 100% to 0% using a logarithmic curve. If a region is selected the fade function will apply to that, if not, the entire sample will fade out.
    • Declick in - Smoothes clicks at the beginning of a selection.
    • Declick out - Smoothes clicks at the end of a selection.
  • Waveform
    • Center - Removes DC offset. The average amplitude of the waveform is shifted to be at the zero crossing.
  • Time
    • Reverse (Alt+Left) - Reverses the entire wave or selection.
    • Time stretch / pitch shift (Alt+T) - Opens the Time Stretch / Pitch Shift Tool to independently manipulate pitch, time and formants.
    • Drum (loop) stretch (Ctrl+T) - Opens the Drum (loop) stretch tool, which restores decay portions of drum beats that may have been cropped during the slicing process.
    • Scratch (envelope) - Uses the All-Purpose Envelope to apply 'scratching' effects to the sample, i.e. automate the playback direction and speed.
  • Channels
    • Swap channels - Swaps the left and right channels.
    • Convert left channel to mono - Converts the sample to a mono file based on the left channel.
    • Convert right channel to mono - Converts the sample to a mono file based on the right channel.
    • Convert mono signal to mono format - Converts the file to a mono format if both left and right channels are equal.
  • Synthesis
    • Generate noise - Generates white noise in the selected region or whole sample if a region is not selected.
  • Scripting
    • Run script - Opens a menu containing the list of available scripts. You can write your own scripts using Pascal, which will be compiled by the paxCompiler and run when you select the script from the menu. The paxCompiler is a true Pascal compiler that allows you to write code to perform complex DSP on your samples. Save scripts - as .pas files in the FL Studio installation directory under ..\Plugins\Fruity\Effects\Edison\Data\Scripts. Files saved here will be visible the next time you use the 'run script' command. Dialogs - Note that while some of the demo scripts show a dialog, it isn't necessary to use them. Errors - If a script has an error, a dialog is shown explaining the error with options to 'edit' the script or 'run' it again. Writing scripts - Examine the contents of the existing scripts and read the Reference.txt file in the script directory to learn more about writing them and the functions available. You can learn more about Pascal HERE.
    • Run last script - Repeats the last script run.
  • Noise
    • Acquire noise threshold (Alt+N) - Uses the peak of the selection as the noise/gate threshold. To use: select a region of the sample containing only noise and click this button.
    • Gate noise - Forces the sections of the sample below the noise threshold (shown in green) to silence.
    • Trim side noise - Trims any parts of the sample that are below the threshold volume. Set gate threshold - Left click the peak meter (6) and move the mouse up/down to change the threshold. A green band will display (as shown in the Edison screen shot above) in the sample view window.
    • Trim all noise & slice up - Trims any parts of the sample that are below the threshold volume and slices the regions defined by the resulting gaps. Set gate threshold - Left click the peak meter (6) and move the mouse up/down to change the threshold. A green band will display (as shown in the Edison screen shot above) in the sample view window.
  • Spectral
    • Convolution reverb (Ctrl+R) - Opens the Convolution/Reverb Tool.
    • Blur (Ctrl+B) - Opens the Blur Tool.
    • Equalize (Ctrl+Q) - Opens the Equalize Tool.
  • Regions
    • Normalize all regions - Normalizes the amplitude on a per-region basis. Normalization increases the volume of the waveform so that the loudest sample is at 100% of the available amplitude.
    • Declick in all regions - Remove clicks from the start of regions (works by creating a very fast fade-in).
    • Declick out all regions - Remove clicks from the end of regions (works by creating a very fast fade-out).
    • Perfect all regions - Declicks the start and end of all regions (as described above).
    • Tune loop (Ctrl+L)- Opens the Tune Loop Tool dialog that allows you access to the main loop controls for a region.
  • Analysis
    • Convert to score and dump to piano roll - Slices the sample, pitch-detects each slice and creates a note-score to match, dumping it to the Piano roll.
  • Sequencing
    • Send to playlist as audio clip (Shift+C) - Dumps the selection to the Playlist as an Audio Clip.
    • Send to selected channel - Dumps the selection to the selected Channel.
    • Note: An alternative method for exporting audio is to use the Drag / copy sample / move selection button on the Sample Edit Functions shortcut toolbar.

Regions

  • Regions
    • Add region (Alt+M) - Adds region start and end markers at the boundaries of the defined region.
    • Add marker (M) - Adds a single marker at the start of the selected region. This may be dragged to a new position by the square handle at the top of the marker.
    • Set loop (Alt+L) - Defines the selected region as a loop. Special red loop markers will appear.
    • Delete (Shift+Ctrl+Del) - Deletes the selected region, loop or marker.
    • Rename all (Ctrl+F2) - Steps though the regions in the editor allowing them to be named.
    • Quick rename all (Alt+F2)- Steps though the regions in the editor providing quick name options, allowing all regions to be named.
    • Assign trigger notes to all - Automatically steps through the regions/slices allowing you to assign trigger notes to each region. Trigger notes are the MIDI note numbers that will plat the specific region.
    • Assign to all - Choose to automatically assign regions to: Whole Keyboard, White Notes, Black Notes or None.
  • Detection
    • Auto slice
      • Dull auto-slicing - Fewer slices/regions.
      • Medium auto-slicing (Alt+S) - Average slices/regions.
      • Sharp auto-slicing - Many slices/regions.
      • Small grid-slicing - Slices the sample according to the small grid lines.
      • Medium grid-slicing - Slices the sample according to the medium grid lines.
      • Large grid-slicing - Slices the sample according to the large grid lines.
    • Detect pitch regions - Detects and slices according to regions of constant pitch.
    • Zero-cross check all regions - Moves the region markers to the nearest zero-crossing. Removes clicks at the start and end of the regions.
    • Freeze all (switch) - Prevents region editing.

View

  • Audio
    • Spectrum (S) - Selects spectrum view. This display mode shows time on the horizontal axis and frequency on the vertical axis. Brighter or more saturated colors (depending on the spectrum gradient options) represent louder frequencies.
    • Dual view - Shows both the spectrum and waveform views superimposed.
    • Display settings - Change the appearance of the spectrum display mode.
      • Fancy mode - Smoothed waveform view.
      • Waveform channels - Note that in stereo mode L and R channels are superimposed with slightly different colours (zoom to view more clearly).
        • Mono - Display a single (L/R averaged) waveform.
        • Multichannel - Display all channels (superimposed).
        • Left - Display Left channel.
        • Right - Display Right channel.
      • Spectrum max resolution - 32, 64, 128, 256, 512 1024 and 2048 bands. This is the number of vertical slices the frequency domain is divided into, higher numbers provide more detailed analysis. Resize Edison to obtain a larger view.
      • High quality - Improves the visibility of details, such as peaks, when the display is zoomed out to maximum.
      • Natural view (N) - Improves visibility of the lower/mid frequency details by applying a logarithmic vertical scale.
      • Spectrum gradient - Charcoal, Furnace, Glacier, The Matrix. Choose the theme that reveals the most detail in the sound or that appeals to you.
  • Regions
    • Regions - Turns region markers on/off.
    • Loop - Turns loop markers on/off.
  • Time
    • Time in samples - Displays the time-base in samples. This information is displayed to the bottom left of the peak meter (13). Right-clicking the time display (13) opens a context menu showing -
      • Deselect (Up arrow) - Deselects the current selection.
      • Select before current selection - Selects the area before the current selection.
      • Select after current selection - Selects the area after the current selection.
      • Select zoomed part (Ctrl+A) - Selects the region defined by the visible sample.
      • Select previous region (Left arrow) - Selects the previous region.
      • Select next region (Right arrow) - Selects the next region.
  • Misc
    • Scroller above - Places the Zoom / Scroll bar (12) above the sample.
    • Background gradient - Applies a 3D background effect to the sample edit window (7)

Snap

  • Snap to grid (1) - Envelope points and selections snap to the background grid.
  • Snap to regions (2) - Envelope points and selections snap to the region markers.
  • Snap to samples (3) - Envelope points and selections snap to samples.
  • Snap to zero-crossing (4) - Envelope points and selections snap to zero crossings. This is the point where the waveform crosses the 0 amplitude line and is useful to avoid clicks.
  • Snap to pitch period (5) - Envelope points and selections snap to the period of any pitch detected at the selection point.

Select

  • Deselect (Up arrow) - Deselects the current selection.
  • Select before current selection - Selects the area before the current selection.
  • Select after current selection - Selects the area after the current selection.
  • Select zoomed part (Ctrl+A) - Selects the region defined by the visible sample.
  • Select previous region (Left arrow) - Selects the previous region.
  • Select next region (Right arrow) - Selects the next region.

Zoom

  • Zoom in 2x (PgUp) - Zooms in 2 times.
  • Zoom out 2x (PgDn) - Zooms out 2 times.
  • Zoom out full (Home) - Displays the full sample.
  • Zoom on selection (End) - Zooms the selection to fill the Sample Edit Window.
  • Zoom on left of selection (Ctrl+Left) - Centers the Sample Edit Window on the right edge of the selection at maximum zoom.
  • Zoom on right of selection (Ctrl+Right) - Centers the Sample Edit Window on the left edge of the selection at maximum zoom.

 
Home | About | Link | Link
Simple Proff Blogger Template Created By Herro | Inspiring By Busy Bee Woo Themes